Advertisement
WARNING:
CAUTION:
1.
Verify the main power switch on the control unit is in the "OFF" position when the
snowplow is not in use.
2.
Properly mount the snowplow prior to moving the vehicle.
3.
Stand clear of the attachment area when mounting the snowplow to the undercarriage
and operating the Power Hitch Connect/Disconnect switch. Failure to do so may
result in serious injury or death.
4.
Securely position all mounting pins prior to operating your snowplow.
5.
Do not position your body between the snowplow and the vehicle when servicing
or operating.
6.
Position snowplow in such a manner as to not block your vision or plow headlights
while in transit.
7.
Do not change the position of the blade while in transit.
8.
Do not exceed 40 mph when transporting plow.
9.
Do not exceed 10 mph when plowing.
10.
Always lower blade when vehicle is parked.
11.
Vehicles equipped with air bags are designed to be activated in a frontal collision
equivalent to hitting a solid object or barrier at approximately 14 mph or more.
Careless or high speed driving while plowing snow, which results in vehicle impact
deceleration equivalent to or greater than the airbag deployment threshold described
above, would deploy the airbag.
Models 760 and 800 Blizzard snowplows have United States patents pending.
Should the WARNING! label or any of the labels
that came with your snowplow become hard to
read or wear off, contact your local dealer or call
our Customer Service Department toll free at
1-888-680-8600 for replacements.
02 Warning!
Warning!
Prior to operating your straight blade, review the WARNING! label at the
passenger's side rear of the moldboard (shown below).
Note: Read and understand all warnings indicated in this manual prior to
operating the snowplow. Warnings and cautions in the manual are indicated
by the icons shown to the left.
WARNING
WARNING
READ
OWNER'S
MANUAL
THOROUGHLY
PRIOR TO
OPERATING
PLOW.
Calumet, Michigan 49913
BLZ 1024
Advertisement
