Detailed Description 1. Lock catch: For installing and disassembling reflector and other accessories. 2. Umbrella hole: For installing/removing an umbrella. 3. Reflector: For gathering light to improve the central illumination. 4. Angle fixing knob: Allows for adjusting and fixing the illumination direction. 5.
Page 5
Usage 1. Installation of the Reflector When installing the reflector, When removing the reflector, Press lock catch to release the ensure its mounting points align push and hold the lock catch reflector. with the slots on the light fixture. and rotate until the reflector is When the mounting points and free to be removed from the slots are aligned, push the...
Page 6
3. 2.4G and Bluetooth Remote Control FS-150B/200B/300B are able to be remotely controlled by 2.4G remote controller, or by NANLINK APP through the WS-TB-1 transmitter box or via Bluetooth module directly. ① Note: 2.4G remote controller and transmitter box are sold separately.
Page 7
Operating Instructions 1. First ensure that the power switch of the fixture is off. Now turn on the light, the LCD screen will display all the relevant information for the fixture. CH: 512 000% 5600K 2. CCT Mode Setting Press MODE button to CCT mode, rotate the "left knob" to set the DIM (DIM range: 000%…100%), rotate the "right knob"...
Page 8
3. EFFECT Mode setting Press the MODE button to EFFECT mode. The FS-150B/200B/300B have built-in effects including CCT LOOP, INT LOOP, FLASH, PULSE, STORM, TV, PAPARAZZI, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION and WELDING.
Page 9
CCT LOOP EFFECT CH: 512 EFFECT CH: 512 CCT LOOP CCT LOOP WELDING DIM: 100% DIM: 100% Rotate the "left knob" to select the desired effect. ① CCT LOOP CCT LOOP setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 02S…30S), then rotate the "left knob"...
Page 10
② INT LOOP INT LOOP setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 02S…30S), then rotate the "left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 EFFECT CH: 512 INP LOOP FX: INP LOOP DIM: 000% - 100% DIM: 000% - 100%...
Page 11
EFFECT CH: 512 EFFECT CH: 512 FX: FLASH FX: FLASH DIM: 100% DIM: 099% Rotate the "left knob" to adjust the value of DIM, CCT and INTERVALS. ④ PULSE PULSE setting: rotate the "right knob" to select from DIM, CCT and PULSES/MIN (Range: 001…240), then rotate the "left knob"...
Page 12
⑤ STORM STORM setting: rotate the "right knob" to select from DIM, CCT and INTVL (Range: 1s ... 60s) , then rotate the "left knob" to adjust the value of DIM, CCT and INTVL. EFFECT CH: 512 EFFECT CH: 512 STORM FX: STORM DIM: 100%...
Page 13
EFFECT CH: 512 EFFECT CH: 512 FX: TV FX: TV DIM: 000% - 100% DIM: 099% - 100% Rotate the "left knob" to adjust the value of DIM, CCT and SPD. ⑦ PAPARAZZI PAPARAZZI setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 001…100), then rotate the "left knob"...
Page 14
⑧ CANDLE/FIRE CANDLE/FIRE setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 001…100), then rotate the "left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 EFFECT CH: 512 CANDLE/FIRE FX: CANDLE/FIRE DIM: 000% - 100% DIM: 000% - 100% Rotate the "right knob"...
Page 15
EFFECT CH: 512 EFFECT CH: 512 FX: BAD BULB FX: BAD BULB DIM: 100% DIM: 099% Rotate the "left knob" to adjust the value of DIM, CCT and SPD. ⑩ FIREWORK RIREWORK setting: rotate the "right knob" to select from DIM, CCT, SPD (Range: 001…100) and DECAY (Range: 001…100), then rotate the "left knob"...
Page 16
⑪ EXPLOSION EXPLOSION setting: rotate the "right knob" to select from DIM, CCT, SPD (Range: 001…100) and DECAY (Range: 001…100), then rotate the "left knob" to adjust the value of DIM ,CCT, SPD and DECAY. EFFECT CH: 512 EFFECT CH: 512 EXPLOSION FX: EXPLOSION DIM: 100%...
Page 17
EFFECT CH: 512 EFFECT CH: 512 FX: WELDING FX: WELDING DIM: 000% - 100% DIM: 099% - 100% Rotate the "left knob" to adjust the value of DIM, CCT, SPD and PAUSE. Special effects may be upgraded based on the firmware update. Please refer to the latest firmware function ·...
MENU MENU OUTPUT MODE: MAX OUTPUT MODE: MAX Rotate the "left knob" to set the channel. ② OUTPUT MODE MENU MODE OUTPUT MODE: MAX Press MODE button to MENU. MENU MENU CH: 512 OUTPUT MODE: MAX OUTPUT MODE: Rotate the "right knob" to OUTPUT MODE. MENU MENU CH: 512...
③ BLUETOOTH RESET MENU MODE OUTPUT MODE: MAX Press MODE button to switch to the MENU. MENU MENU RESET WIRELESS PR: V1.0 OUTPUT MODE: MAX Rotate the "right knob" to BT. MENU BT RESET RESET BACK RESET WIRELESS PR: V1.0 Press the "right knob"...
MENU BT RESET BACK RESET OUTPUT MODE: MAX Press the "right knob" to confirm the reset, and it will return to menu after bluetooth reset. ④ WIRELESS PROTOCOL Please refer to P5 for the details of wireless protocol setting. ⑤ MENU MODE OUTPUT MODE: MAX...
Rotate the "left knob" to select ON or OFF. Note: When the fan is turned on, the maximum output of the light will be 100%. When the fan is turned off, the maximum output of FS-150B/Forza 200B are 15%, while the maximum output of FS-300B is 25%.
FOUND FIRMWARE FOUND FIRMWARE _V1.02.08 _V1.02.08 BACK UPDATE BACK UPDATE Rotate the "right knob" to select UPDATE. FOUND FIRMWARE FIRMWARE _V1.02.08 UPDATED BACK UPDATE Press the "right knob" to confirm the update, it will show "FIRMWARE UPDATED" after the firmware update is completed.
Page 23
MENU 菜单 LANGUAGE: 语言: 中文 VERSION: V0.01.06 版本: V0.01.06 Rotate the "left knob" to select 中文 or English. ⑧ VERSION MENU MODE OUTPUT MODE: MAX Press MODE button to MENU. MENU MENU LANGUAGE: ENG VERSION: V0.01.06 OUTPUT MODE: MAX Rotate the "right knob" to VERSION to check the firmware version. ⑨...
EFFECT CH: 512 EFFECT CH: 512 CCT LOOP CCT LOOP DIM: 100% DIM: 100% Long press the "right knob" again to release the lock status. 5. When the fixture is not in use, please turn off the power switch. Safety Precautions 1.
Page 25
What's in the box? Please kindly check Light Fixture x 1 Power Cable 4.5M x 1 Reflector x 1 COB Protective Cap x 1 User Manual x 1 FS-150B FS-200B FS-300B USER MANUAL Guangdong NanGuang Photo&Video Systems Co., Ltd...
Page 26
If the failure is not resolved after troubleshooting, please contact with place of purchase or manufacturer. This manual has been compiled according to the rigorous testing for Nanlite products. Product designs are subject to change without prior notice. The latest version of the manual for this product is downloadable at www.nanlite.com.
Page 27
Version: V1 2022-09-28 +86-754-85751187 +86-754-85300887 service@nanlite.com Dongli Section, Highway 324, Chenghai, Shantou City, Guangdong Province, China www.nanlite.com...