Wireless Communication; Connecting Peripherals - Panasonic Toughbook CF-H1CSLFZ6M Reference Manual

Troubleshooting (Advanced)
Network
Cannot connect to network.
Cannot check the computer's MAC
address.

Wireless Communication

Cannot connect to a network.
Access point is not detected.

Connecting Peripherals

An error occurs while installing the
driver.
Set LAN ( page 68).
Follow the steps below.
Click [start] - [All Programs] - [Accessories] - [Command Prompt].
A
Input "ipconfig/all", and press
B
Write down the 12-digit string of alphanumeric displayed in the "Phys-
C
ical Address" line of the LAN or the wireless LAN (only for model with
wireless LAN).
Input [exit], and press
D
Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] in
the [Advanced] menu of the Setup Utility (
Disable the Wireless Communication Disable Utility (
Restart the computer.
Confirm that / /
If / / is not displayed on the notification area, turn on the wireless
communication ( page 69).
When you install a driver of card or peripheral device, make sure that the driver
is compatible with the operating system. If it is not compatible, malfunction may
occur. For information about the driver, contact the manufacturer of the periph-
eral device.
(Enter).
(Enter).
page 82).
is displayed on the notification area.
95
page 70).