Starting The Setup Utility - Panasonic Toughbook CF-H1CSLFZ6M Reference Manual

Setup Utility
You can make the settings of the computer's operating environment (password settings, startup drive selection, etc.)
Preparation
Set the computer to the Cradle and connect an external keyboard to the Cradle.

Starting the Setup Utility

1
Turn on or restart the computer.
2
Press or
F2 Del
computer starts the startup procedure.
When [Enter Password] is displayed, input your password.
When you start the Setup Utility with Supervisor Password
You can make the settings of all items of the Setup Utility.
When you start the Setup Utility with User Password
Note the following:
• In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
• In the [Security] menu, you can change only the User Password when [User Password Protection] is set to
[No Protection]. You cannot delete the User Password.
• In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override].
• F9 (Setup Defaults) does not function.
several times while [Panasonic] boot screen is displayed soon after the
79