Table of Contents
Advertisement
1. DOCUMENT HOLDER
2. AIR FILTER METER: This gauge shows the condition of the air filter when the engine is running.
3. MAGNUM DIGITAL CONTROLLER (MDC): Refer to
4. AUXILIARY LIGHT SWITCHES (Optional):These switches operate the control panel and interior lights.
5. CIRCUIT BREAKER FOR CAM LOCK CONNECTORS (Optional): Units equipped with one set of cam lock
receptacles (as shown) have one 450A breaker. Units equipped with two sets of cam lock receptacles have two
450A breakers.
6. CAM LOCK CONNECTORS (Optional): Series 16 taper nose 400A/600V cam locks are connected here. Refer
to
"Generator Cam Lock Connection(s) Option" on page
7. OUTPUT GROUND CONNECTION: (Green) Cam lock ground connection for attaching the generator to a good
earthen ground.
8. CONNECTION FOR BATTERY CHARGER (Optional): Allows for 120VAC input to power onboard battery
charger.
9. CONNECTION FOR ENGINE BLOCK HEATER (Optional): Allows for 120VAC input to power the engine block
heater.
10. 120/240V TWIST-LOCK CONVENIENCE OUTLETS (3): These outlets are used for connecting additional loads
or equipment to the generator in the 240 and 208 voltage selections only.
11. REMOTE START TERMINAL BLOCK: Used to connect the generator to a dry-contact closure switch for remote
starting of the generator.
12. 120V GFCI DUPLEX CONVENIENCE OUTLETS (2): Outlets for additional equipment that may require Ground
Fault Circuit Interrupt (GFCI) protection.
13. OUTPUT GROUND CONNECTION: Ground lug for attaching the generator to a good earthen ground.
14. CONNECTION TERMINAL LUGS: External loads can be wired to these lugs.
15. DOOR SAFETY SWITCHES: The connection lug door and cam lock door are equipped with safety interlock
switches that will trip the main circuit breaker and disable the voltage regulator if the doors are opened while the
unit is operating.
16. 50A CIRCUIT BREAKERS FOR 120/240V CONVENIENCE OUTLETS (3)
17. 20A CIRCUIT BREAKERS FOR 120V GFCI CONVENIENCE OUTLETS (2)
18. MAIN CIRCUIT BREAKER FOR CONNECTION LUGS: The main circuit breaker will trip in order to protect the
generator from damage if a load is too great.
19. DIESEL EXHAUST FILTER CLEANING SWITCH: This switch toggles between enabling or disabling the auto
exhaust cleaning feature and entering manual regeneration. For more information on diesel exhaust filter cleaning
operation, refer to
"Exhaust Filter Cleaning Operations" on page 29
"Magnum Digital Controller (MDC)" on page
37.
.
20.
19
Advertisement
Table of Contents
