Panasonic Toughbook CF-30CCSQZBM Reference Manual page 49

Fingerprint Reader
1
Disable Power-on Security
Log on to Windows as an Administrator.
A
Click [start] - [All Programs] - [Protector Suite QL] - [Control Center].
B
• The [Fingerprint Control Center] screen appears.
Click [Settings], and click [Power-on Security].
C
Remove the check mark from [Enable power-on security using fingerprints], and click [OK].
D
Click [Fingerprints], and click [Enroll or Edit Fingerprints].
E
• [User Enrollment] wizard starts. Follow the on-screen instructions.
When the [User's Fingers] screen appears, click [Next] without deleting fingerprint samples.
F
Click [Manage Passwords].
G
Select [Power-On] in [Password Types], and click [Unset password].
H
Enter the password for Power-on Security, and click [OK].
I
Click [Close].
J
• Confirm that there is no item in [Password Types].
Click [Next] - [Next].
K
Click [Finish].
L
• Follow the on-screen instructions.
2
Delete Fingerprint Data.
Performed by each user.
Click [Fingerprints], and click [Delete].
A
The [Swipe finger] screen will appear.
Swipe user's finger.
B
• If the authentication is successfully completed, the confirmation message appears.
Click [Yes].
C
• Confirm that all users' data was deleted.
NOTE
If the enrollment mode is set to "Enrollment to the hard disk" (
2
after step . Performed by the Computer Administrator.
Click [start] - [All Programs] - [Protector Suite QL] - [Control Center].
A
Click [Settings], and click [Power-on Security].
B
Select the fingerprint, and click [Remove].
C
• Surely remove all of the fingerprints.
page 44), you need to remove the fingerprints data
49