Panasonic Toughbook CF-30CCSQZBM Reference Manual page 23

Multimedia Pocket
3
Press the release handle (B).
The release handle pops out.
4
Pull the release handle (B) to draw out the device partway, and hold
the device on its both sides to remove.
5
Carefully insert the device into the multimedia pocket by pushing
both corners until it surely fits in the slot.
Press the release handle (C) to set in.
You can insert the device with the computer turned on.
Insert the device with the label side up.
6
Close the cover until it clicks.
CAUTION
Hold the device by both sides. Otherwise the device may be damaged.
Do not apply excessive force when raising the slot side upward and inserting the device.
NOTE
You can see that the device is recognized or not by double-clicking
mation] menu in the Setup Utility (
recognized (or if the media cannot be accessed), turn off the computer and reinsert the device.
70). (When using a second battery pack, press Fn+F9.) If the device is not
page
on the notification area, or checking the [Infor-
23