Panasonic Toughbook CF-30CCSQZBM Reference Manual page 44

Fingerprint Reader
3
TPM Fingerprint Utility Initialization
Performed by the Computer Administrator.
The "Invalid TPM status" message is displayed by the "Protector Suite QL Icon"
If the TPM is not being used, skip this step.
Click on the "Invalid TPM status" message to start [Advanced Security Initialization Wizard].
A
Follow the on-screen instructions.
NOTE
If the "Invalid TPM status" message is not displayed
Click [start] - [All Programs] - [Protector Suite QL] - [Control Center] - [Settings] - [System Settings] - [TPM] - [Initialize
TPM].
4
User Fingerprint Enrollment
Performed by each user.
Click [start] - [All Programs] - [Protector Suite QL] - [User Enrollment].
A
Carefully read the License Agreement, select [I Accept the terms of the License Agreement] and click [OK].
Click [Next].
B
Select an enrollment mode, and click [Finish].
C
Enrollment mode
You can make the configuration for the enrollment only once during this initialization phase.
• Enrollment to the biometric device
All enrolled fingerprints are stored directly in the fingerprint sensor. The user data will be secured by the
hardware protection keys obtained by the fingerprint sensor. This mode allows up to 21 fingerprints to be
enrolled.
• Enrollment to the hard disk
All enrolled fingerprints are stored on the hard disk. Hardware protection of the user data is not possible,
but multiple users can enroll their fingerprints.
When the [Finish] screen appears, read the description carefully.
[User Enrollment] wizard starts. Follow the on-screen instructions.
NOTE
Enroll at least two fingers. Even if one of them is injured, you can use another one to access your account and secret
data. For further information about the enrollment, refer to "How to Use the Fingerprint Reader" (
gerprint Tutorial].
• Click [start] - [All Programs] - [Protector Suite QL] - [Fingerprint Tutorial].
44
in the notification area.
page 41) and [Fin-