Seat Belt - Hitachi ZAXIS 135US-6 class Operator's Manual

Hydraulic excavator

Table of Contents

Seat Belt

 Be sure to use seat belt (1) when operating the

 Before operating the machine, be sure to examine

seat belt (1) and attaching hardware for any failure. If

any damage and/or wear are found, replace the part

 Replace seat belt (1) every 3 years regardless of

 Consult your authorized dealer for replacement.

1. Confirm that seat belt (1) is not twisted. Securely insert

the end of seat belt (1) into buckle (2). Lightly pull on the

belt to confirm that the buckle latches securely.

2. Push button (3) on buckle (2) to unfasten seat belt (1).

Replace seat belt (1) if it is damaged or worn, or if the

machine is involved in an accident which puts severe stress

on the seatbelt.

If the engine is operated without fastening seat belt (1) and

the pilot control shut-off lever is lowered, the buzzer sounds

after 5 seconds.

After 30 seconds the buzzer changes from a long to a short

intermittent buzzing.

Fastening the seat belt makes the buzzer stop.

OPERATOR'S STATION