Audio Input - Hitachi ZAXIS 135US-6 class Operator's Manual

Hydraulic excavator

Table of Contents

Audio Input

IMPORTANT: This function is available only to a machine

equipped with an audio input (Optional). Use this

function with proper sound volume.

Audio Input Selection

Attach the audio input (Optional) device and push AM/FM

Selector/Tuning Switch (1) to display AM and FM screen as

well as AUX input screen (3).

Connecting audio device

By removing AUX IN Cap (4), the audio input terminal

Connect your audio device to the audio input terminal of

the machine with your audio cable.

 Use Φ3.5 mm stereo plug for the connection of audio

input terminal.

 Put AUX IN cap (4) when the audio input is not in use.

Volume Control of audio device

Turn the volume down to the minimum beforehand, and

then turn volume control knob (2) clockwise to adjust the

 If volume control knob (2) has been set to the

maximum level the sound will be extremely loud. Set

volume control knob (2) to the minimum first and

then turn it clockwise to increase the volume. Adjust

the volume control knob on the audio device if the

sound is too low, even when the volume control

knob (2) is set to the maximum level.

 Operate your audio device to play or stop the sound.

OPERATOR'S STATION