Configuring Radius Accounting - HP ProCurve Switch 2900yl-24G Access Security Manual

Note

Configuring RADIUS Accounting

RADIUS Accounting Commands
[no] radius-server host < ip-address >
[acct-port < port-number >]
[key < key-string >]
[no] aaa accounting < exec | network | system |
commands >
< start-stop | stop-only> radius
[no] aaa accounting update
periodic < 1 - 525600 > (in minutes)
[no] aaa accounting suppress null-username
show accounting
show accounting sessions
show radius accounting
This section assumes you have already:
■ Configured RADIUS authentication on the switch for one or more
access methods
Configured one or more RADIUS servers to support the switch
■
If you have not already done so, refer to "General RADIUS Setup Procedure"
on page 5-7 before continuing here.
RADIUS accounting collects data about user activity and system events and
sends it to a RADIUS server when specified events occur on the switch, such
as a logoff or a reboot. The switches covered in this guide support three types
of accounting services:
RADIUS Authentication and Accounting

Configuring RADIUS Accounting

Page
5-32
5-32
5-32
5-35
5-35
5-35
5-40
5-41
5-41
5-29