Ryobi R36XBLWC0 Manual page 9

USING THE PRODUCT
WARNING: The product must be connected
to the lower blower tube at all times.
1. Insert the battery pack into the battery
port until the latch clicks into place. Make
sure that the battery pack is securely
attached before using the product.
2. Press and hold the speed down / on/off
button to turn on the product.
NOTE: Insert the speed nozzle into the lower
blower tube until it clicks into place. Operate
the product in the recommended position
as shown. Always hold the product by the
designated handle and use the lowest speed
necessary to achieve the task.
NOTE: Press the speed up button to
increase the speed of the product. Press the
speed down button to decrease the speed of
the product.
1
2
ON
9
Operation