Panasonic CF-S10CDHZ1M Operating Instructions Manual page 19

If the computer becomes warm during usage
When the screen is displayed on the External Display using Intel
cation area, click and click [Power saver].
([Power saver] for the power plan restrains performance. Accordingly, using application software or peripheral
devices frequently may slow the computer processing speed.)
®
When Intel Wireless Display Software is not used, when the following settings, you can lower the heat inside the
computer.
• When changing to [Panasonic Power management (Better Heat Dispersion)], the following settings will change.
- Change to [High Speed] from [Standard] in [Fan control mode].
Rotation of the cooling fan will become faster and the computer can be cooled down. Note that the battery oper-
ating time will be shorter.
- Switch the screen saver to [Prohibited].
- Other setting changes such as the lowering of the internal LCD brightness and disabling of Windows Aero will
take place.
• When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standard] or [Low Speed] in
[Fan control mode].
• If you are not using a wireless LAN, turn the wireless LAN off.
Use recommended RAM module products. Non-recommended RAM modules may not operate properly, and may
cause damage to your computer.
When using peripheral devices
Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction
manuals of the peripheral devices.
Use the peripheral devices conforming to the computer's specifications.
Connect to the connectors in the correct direction.
If it is hard to insert, do not try forcibly but check the connector's shape, direction, alignment of pins, etc.
If screws are included, fasten them securely.
Remove the cables when you carry the computer. Do not pull the cables forcibly.
Preventing your computer from unauthorized use via wireless LAN/wireless WAN/Bluetooth
<Only for model with wireless LAN/wireless WAN/Bluetooth>
Before using wireless LAN/wireless WAN/Bluetooth, make the appropriate security settings such as data encryption.
Maintenance
To clean the LCD panel and touch pad
Wipe lightly with a gauze or other dry, soft cloth.
To clean areas other than the LCD panel and touch pad
Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area
gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect
painted surfaces.
CAUTION
Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.
Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to
the surface.
Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause
malfunction or damage.
®
Wireless Display Software, click on the notifi-
19