Philips SRP3013 - Universal Remote Quick Start Guide

This Quick Start Guide is for version 2 (V02) Universal Remote Control
Check the label inside the battery compartment for correct version

Insert batteries (not included)

Set up by code selection

1. Switch on your device.
2. Press and hold the device selection button (e.g. TV) for 5 seconds until the red LED is on.
3. Look up the 5-digit code for your brand in the code list. Codes are listed by the device type and brand name. The most popular code is listed first.
4. Enter the first 5-digit code using the digit buttons.
5. If the light is off, a valid code is saved. Otherwise, the light will flash once, and then remains on for code re-entry.
6. Operate the device with the universal remote. If your device responds correctly, it means you have entered the right code. Otherwise, repeat from step 2, and enter the second code on the list.

Learn code from other remote

You must have an original remote for the Universal Remote Control (URC) to learn code from it.

1. Press and hold the device selection button (e.g. TV) for 5 seconds until the red LED is on.
2. Enter the learning code . The red LED will flash once and then remain on.
3. Place the URC and the original remote, head to head aiming at each other, o n a flat surface.
4. On the URC, press the button that you would like to learn a code from the original remote. The LED indicator will blink twice and stay on.
5. On the original remote, press and hold the button that you would like to learn from for 2 seconds.
6. The LED will blink once and stay on if the learning is successful.
   To learn another key, repeat Step 4.
   To exit, press the device button again.
7. The LED will blink 6 times quickly if learning failed. Repeat Step 4 to learn again.

Frequently asked questions

My universal remote does not work at all.

• Check if you have correctly set up the device with the right code.
• Check if you have pressed the corresponding device key for your device.
• Check if the batteries are inserted properly. If the battery level is low, replace the batteries.
• Check if your device is powered on.

If several device codes are listed under the brand of my device, how can I select the correct device code?
To seek the correct device code, test the codes one by one. The codes are sorted by popularity, and the most popular code is listed first.

My device responds only to some of the commands.
You have set a code for which only some commands work properly but some do not. Try other codes until most keys work properly or learn the key from original remote if it supports the learning function.

Most Popular TV Brand & Code