Capter 3
Getting Started
Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using
the player in the following situations.
When you use the player for the first time.
After Initial Setup format.
After updating the player s software.
Caution
Before turning on the power, check that the
connections between the player and other devices
are correct. Also, turn on the power of the devices
connected to the player before turning on the
player s power.
1. Turn on the TV's power and switch the
input.
See the TV s operating instructions for the
details of operating the TV.
2. Turn on the player's power.
Press
STANDBY/ON.
Check that the Setup Navigator menu is
displayed.
If the Setup Navigator menu is not
displayed
Press
HOME MENU to display the
Home Menu, select Initial Setup
Start, then press ENTER.
Navigator
3. Start Setup Navigator.
Press ENTER.
Setup Navigator starts.
4. Select the OSD language.
Use
to select, then press ENTER.
5. Select the appropriate output resolution
for the connected TV.
Use / to select, then press ENTER.
6. Select the appropriate aspect for the
connected TV.
Use
to select, then press ENTER.
7. Close the Setup Navigator menu.
Press ENTER.
Setup Navigator finishes and the setting
is stored.
Press
RETURN to go back to the
previous screen.
Getting Started
39
En
Setup
3