Pioneer MCS-838 Operating Instructions Manual page 3

This product complies with IDA standards.
Cautions on 3D Viewing
Extended viewing of 3D images without rest periods could cause fatigue or discomfort.
Notes on Copyrights
Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use
of CSS (Content Scramble System) for DVD
format, certain restrictions are imposed on
playback, analog signal output, etc., of AACS
protected contents. The operation of this
product and restrictions on this product may
vary depending on your time of purchase
as those restrictions may be adopted and
or changed by AACS after the production of
this product.
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection
systems for Blu-ray Disc format, which
imposes certain restrictions including
playback restrictions for BD-ROM Mark
and or BD+ protected contents. To obtain
additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact
an authorized Customer Service Center.
Many BD-ROM DVD discs are encoded with
copy protection. Because of this, you should
only connect your player directly to your TV,
not to a VCR. Connecting to a VCR results
in a distorted picture from copy-protected
discs.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized
recording, use, display, distribution, or
revision of television programs, videotapes,
BD-ROM discs, DVDs, CDs and other
materials may sub ect you to civil and or
criminal liability.
DB03074
Important Notice for TV colour
system
The colour system of this player differs
according to currently playing discs.
For example, when the player plays the disc
recorded in the NTSC colour system, the image
is output as an NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
If you have a PAL colour system TV, you will
see ust distorted images when using discs
or video contents recorded in NTSC.
The multi system colour TV changes the
colour system automatically according to
input signals. In case that the colour system
is not changed automatically, turn it off and
then on to see normal images on screen.
Even if the disc recorded in NTSC colour
system are well displayed on your TV, these
may not be recorded correctly on your
recorder.