Panasonic KX-MC6020 Operating Instructions Manual page 84

11. Help
Display
"REDIAL TIME OUT"
"REMOVE DOCUMENT"
"RX MEMORY FULL"
"SCANNER POSITION ERROR"
"SELF CALIBRATION"
"TRANSMIT ERROR"
"TONER CARTRIDGE NOT
INSTALLED"
"TRAY #2 LEFT COVER
OPEN"
"WASTE TONER FULL"
b
"CHANGE SUPPLIES"
"WASTE TONER NOT
INSTALLED"
"WASTE TONER REPLACE"
b
"CHANGE SUPPLIES"
84
Cause & Solution
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L The document is jammed. Remove the jammed document (page 99).
L Attempted to send or copy a document longer than 600 mm (23
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 15) or remove the jammed
paper (page 94).
L If feature #442 (page 63) is set to "ALWAYS",
– check the connection between the computer and the unit.
– check the computer is turned ON.
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
L The unit is changing the color calibration. Wait for a while.
L A transmission error occurred. Try again.
L The toner cartridge is not installed. Install it (page 10).
L The left cover of the optional input tray is open. Close it.
L The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
L The waste toner cartridge is not installed. Install it (page 9).
L The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately (page 9, 106).
For assistance, please visit http://www.panasonic.com/help
5
/ ") using
8