Panasonic KX-MC6020 Operating Instructions Manual page 59

Feature/Code
Setting the recording paper
type
{#}{3}{8}{3}
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
Holding the previous contrast
setting
{#}{4}{6}{2}
Setting the default operation
mode
{#}{4}{6}{3}
Setting the default operation
mode timer
{#}{4}{6}{4}
Cleaning the drum
{#}{4}{8}{0}
Setting toner save feature
{#}{4}{8}{2}
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{4}{8}{5}
Changing the color
calibration for cyan color
{#}{4}{8}{6}
Selection
{1} "PLAIN PAPER" (default): 75 g/m
{2} "THIN PAPER": 60 g/m
{3} "THICK PAPER": 106 g/m
Note:
L This setting is valid for both the standard input tray and the optional input
tray.
L "THICK PAPER" will be displayed only when "#1" is selected for the
following:
– Paper input tray setting for fax (Feature #440 on page 63).
– Paper input tray setting for copy (Feature #460 on page 64).
– Paper input tray in PCL
– Paper input tray setting for the scan to e-mail print feature (Feature #565
on page 71).
To set the length of time before the unit enters the power save mode.
{1} "5min": 5 minutes
{2} "15min" (default): 15 minutes
{3} "30min": 30 minutes
{4} "1h": 1 hour
Note:
L During the power save mode, the unit needs to preheat the fuser unit before
printing.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} "COPY" (default): Copy mode is selected as default.
{2} "FAX": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
Clean the drum cartridge automatically. See page 103 for details.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
9. Programmable Features
2 2
to 105 g/m
2 2
to 74 g/m (16 lb to 19 lb) paper.
2 2
to 165 g/m (29 lb to 44 lb) paper.
®
(Feature #760 on page 65).
(20 lb to 28 lb) paper.
59