Panasonic KX-FLM661 Operating Instructions Manual page 51

Feature/Code
Changing the password for
feature programming via
remote operation
{#}{1}{5}{5}
Setting the ringer pattern
{#}{1}{6}{1}
Changing the ring count in
FAX ONLY mode
{#}{2}{1}{0}
Setting the Caller ID list to
print automatically
{#}{2}{1}{6}
Setting the time adjustment
{#}{2}{2}{6}
Setting the recording paper
size
{#}{3}{8}{0}
Holding the previous contrast
setting
{#}{4}{6}{2}
Setting the default operation
mode
{#}{4}{6}{3}
Setting the default operation
mode timer
{#}{4}{6}{4}
Selection
1. {Menu} i {#}{1}{5}{5} i {Set}
2. Enter the current password. i {Set}
L The default password is "1234".
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via web browser (KX-
FLM671, LAN connection only).
{1} "A" (default)
{2} "B"
{3} "C"
{1} "1"
{2} "2"
{3} "3" (default)
{4} "4"
{5} "5 EXT. TAM" (External Telephone Answering Machine)
Note:
L If you are using the unit with an answering machine, set to more than 4
(page 43).
{0} "OFF" (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{1} "ON": The unit will print the Caller ID list automatically after every 30 new
calls (page 46).
Using this feature, the unit's date and time setting will be automatically adjusted
when caller information is received.
{1} "AUTO" (default): The date and time setting will be automatically adjusted.
{2} "MANUAL": Deactivates this feature.
{1} "LETTER"(default): Letter-size paper
{2} "A4": A4-size paper
{3} "LEGAL": Legal-size paper
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} "COPY": Copy mode is selected as default.
{2} "FAX" (default): Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
10. Programmable Features
51