Setting The Original - Panasonic KX-FLM661 Operating Instructions Manual

Document Requirements

2.4 Setting the original

1
Adjust the width of the document guides (1) to fit
the actual size of the document.
2
Insert the document (up to 20 pages) FACE DOWN
into the feeder until a single beep is heard and the
unit grasps the document.
Note:
L Check that any ink, paste or correction fluid has dried
completely.
L Remove clips, staples or other fasteners.
L Do not insert the following types of documents:
(Make a copy of the document and set the copy
instead.)
– Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
L To set a document with a width of less than 210 mm
1
(8 / "), we recommend using a copy machine to copy
4
the original document onto A4 or letter-size paper,
then setting the copied document.
L Do not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using a copy machine and set the copy.
L Available document size, document weight and
effective scanning area are as follows:
1
For assistance, please visit http://www.panasonic.com/help
Minimum document size
128 mm
(5")
Maximum document size
216 mm
1
(8 / ")
2
Effective scanning area
L Shaded area will be scanned.
5
4 mm ( / ")
32
208 mm (8
216 mm (8
Document weight
L Single sheet:
2 2
45 g/m to 90 g/m (12 lb to 24 lb)
L Multiple sheets:
2 2
60 g/m to 80 g/m (16 lb to 21 lb)
2. Preparation
5
4 mm ( / ")
32
5
4 mm ( / ")
32
5
4 mm ( / ")
32
3
/ ")
16
1
/ ")
2
19