Loading Documents - Panasonic KV-S3065 Operating Instructions Manual

Loading Documents

Acceptable documents
Document size:
Paper thickness: Continuous paper feeding
Single paper feeding
Document smaller than A7 size
Maximum number of sheets loadable on the hopper tray:
2
g/m
lb.
Width less than A4 short edge
Max. number
of sheets
Width between A4–A3 short edge
≥ Each number of sheets indicates a guideline for fresh paper.
≥ The number of sheets depends on the paper quality. If a paper feed problem occurs, reduce the number of sheets
of the document loaded on the hopper.
≥ The height of the document should not exceed the limit mark on the document guide.
Recommendable paper: Plain paper
The following types of documents may not be scanned properly.
≥ Broken or notched documents
≥ Curled, wrinkled or folded documents
Curl:
Less than
5 mm
≥ Perforated or punched documents
≥ Not rectangular or irregularly shaped documents
≥ Tracing paper
≥ Thermal paper
When scanning is not performed properly, try the following methods:
≥ Set the feed speed to "Slow".
≥ Scan the documents by manual feeding.
≥ Set the paper path selector to straight.
The following types of documents may cause frequent jams and double feeding.
≥ Extremely smooth or shiny paper or paper that is highly textured
≥ Paper with carbon
≥ Carbonless paper
If a paper jam or double feeding occurs, clean the rollers.
When a jam occurs at the document feeder, reduce the number of sheets loaded on the hopper to about 20.
Types of documents to avoid
≥ OHP sheets, other plastic films, cloths, or metallic sheets.
≥ Paper with irregularities such as tabs, staples, paste, etc.
≥ Documents with wet ink
≥ Thick or irregular documents such as envelopes, documents that are glued together, etc.
Be sure to remove the document from the exit tray after it is scanned.
When scanning different size documents, scanned sheets may need to be reordered for optimum performance.
Thick, thin or important document should be scanned by fed manually one sheet at a time.
48~297 mm (1.9~11.7 in.)
70~431 mm (2.75~17 in.)
40~157 g/m
20~157 g/m
157 g/m
Feeding direction
Less than
5 mm
2
2
2
(42 lbs.) only
40 52 64
11 14 17
350 320 300 250
240 220 200 160
Fold:
75 80 90 104
20 21 24 28
240 210 180
160 140 120
Feeding direction
157
42
120
80
13