Table of Contents
Advertisement
Bluetooth Pairing
1.
Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red.
2.
From the bluetooth settings of your audio source, select your Shure bluetooth device.
3.
LED turns blue when successfully paired.
Pairing Multiple Bluetooth Devices
1.
Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red.
2.
From your audio source, select "Shure BT1."
3.
LED turns blue when successfully paired.
To pair second device:
1.
Press and hold the center button on the second device until the LED flashes blue and red.
2.
Select the second device on your audio source.
3.
LED turns blue on second device when successfully paired.
Pairing Bluetooth Device to a PC
If you are having difficulty pairing your BT1 earphones to your PC, you may need to update your drivers. Here are two ways to
update your computer driver via the Intel website.
1.
Manually: This requires that you locate your wireless adapter and then download the specific driver update for that
wireless adapter. Information and drivers are located here:
2.
Intel Update Utility: This requires you to download the update app, run the app and allow it to scan your computer for
required driver updates. Download the app here:
Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to your PC user manual for more information.
Bluetooth Accessory Quick Start Guides
•
BT1 quick start
•
BT2 quick start
®
Manual
Intel Update
Update.
Utility.
Shure Incorporated
7/24
Advertisement
Table of Contents
