Shure SE110 User Manual

Balanced MicroSpeakers and a
stylish sound isolating design to
deliver a rich, lifelike listening
experience, the Shure SE110 is
an ideal portable listening device
upgrade. An included modular cable
and interchangeable Sound
Isolating™ sleeves provide a
comfortable, personalized
fit. The carrying case further
enhances the portability of
these lightweight earphones.
©2007, Shure Incorporated
27EN3254 (Rev. 2)
Grasp the body of earphone and gently twist to remove.
Note: Do not pull on cable to remove earphone.
SE110
Suggested methods for wearing the earphones are
Sound Isolating™ Earphones
illustrated below.
Tighten the cable and take up slack by raising the cable sleeve.
Printed in U.S.A.
Your earphones come with a selection of sleeves. Make sure the sleeve
you choose is easy to insert into your ear, fits comfortably, and is easy
to remove from your ear.
Note: carefully slide sleeve over earphone nozzle barb for a secure grip.
Over the ear
in front
Straight down
in front
Soft Flex Sleeves
In small, medium, and large sizes.
Made from pliable rubber.
Soft Foam Sleeves
When using the foam sleeves, compress the sleeve
between your fingers before inserting it into the ear canal.
Hold the earphone in place for about ten seconds while the
foam expands and creates a tight seal.
If the earphone seems to be lacking in low frequency response (bass),
check the tightness of the seal between the earphone and your ear, or
try one of the other sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
To change earphone sleeve, twist and pull sleeve to remove it from the nozzle.
Push new sleeve onto nozzle until you feel it slide completely over barb. If any
part of the nozzle is exposed, sleeve is not properly installed. Replace sleeves if
they do not grip the nozzle tightly
Cable
Sleeve
If you notice a change in sound quality, remove the sleeve and check
the nozzle of your earphone. If nozzle is blocked, clear obstruction by
using wire loop end of cleaning tool.
Wire Loop
Nozzle
Barb
When cleaning, do not force any object through the earphone
nozzle! This will damage the earphone sound filter.
Warning: The wax removal loop is only to be used to clean
earphones. Any other use, such as using the tool to clean
ears, could result in injury.
Cleaning
Tool
Nozzle