Standard Accessories - Panasonic WV-CW484S Operating Instructions Manual

Adjusting angle:
Major items on menu setup (Factory default settings are underlined.)
Language:
Camera ID:
Light control:
Super Dynamic 3:
Electronic shutter speed:
AGC:
Sensitivity enhancement:
Synchronization:
White balance:
Motion detection:
Digital noise reduction:
Resolution:
Black-and-white mode:
Privacy zone:
Electronic zoom:
Upside down positioning:
Auto image stabilizer:
Lens:
Back-focus adjustment:
Special:
Weights and dimensions indicated are approximate.

Standard Accessories

Operating Instructions (This document) .............................................................. 1 pc.
Warranty Card ..................................................................................................... 1 pc.
The following parts are used during installation procedures.
Mounting Bracket (For WV-CW484S, WV-CW484SK) ......................................... 1 pc.
Screws for mounting bracket (M4 x 8) (For WV-CW484S, WV-CW484SK) ......... 4 pcs.
Camera attachment ............................................................................................. 1 pc.
Bit for tamperproof screw .................................................................................... 1 pc.
Butyl tape ............................................................................................................ 1 pc.
Panning range: ±175 °
Tilting range: ±75 °
Azimuth range: ±160 °
ENGLISH, FRENCH, GERMAN, SPANISH, ITALIAN, RUSSIAN,
JAPANESE, or CHINESE
Up to 16 characters
ALC
ON or OFF
OFF (1/60), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,
1/10 000 s
ON (HIGH/MID/LOW), or OFF
OFF, x2 AUTO, x4 AUTO, x6 AUTO, x10 AUTO, x2 FIX, x4 FIX,
x6 FIX, x10 FIX, x16 FIX, x32 FIX
VD2, LL, or INT
ATW1, ATW2, or AWC
MODE1, MODE2, or OFF
HIGH or LOW
NORMAL or HIGH
AUTO1, AUTO2, ON, or OFF
ON (1/2), or OFF
ON or OFF
ON or OFF
ON or OFF
Panasonic or other
ABF, MANUAL, AUTO/PRESET/FIX
Chroma, Aperture, Pedestal, Hue, Pixel Compensation
47