Location Of Controls - Panasonic VL-GC002A Installation And Operation Manual

Introduction and Installation

Location of controls

Front view
Camera
• When a visitor presses the Call
Button, the camera will turn on and
an image of the visitor will be shown
on the display of the monitor station
and sub monitor station.
• The camera angle can be adjusted
when installing the door station
(page 9).
Infrared light
Microphone
Speaker
* Be sure to attach the accessory button cover to the Call Button before using it.
(The diagram shows the button cover installed.) (Page 11.)
6
Call Button*
• A visitor can press this button to call
the monitor station and sub monitor
station.
Position indicator (Green)
• The Position indicator is lighted with
a green LED light while the power is
on.
Water drain holes (4 places)
• These holes allow rainwater to drain
away. Do not cover them.