Table of Contents
Advertisement
Quick Links
Thank you for purchasing a Panasonic Door Station.
Please read this Installation and Operation Guide before using the unit and save for future
reference.
L Be sure to install the optional Face Panel (VL-GF001A) to avoid malfunction.
L In the environment such as daylight, the door station image is shown in color. It is shown
black and white in dark environments such as at night, and the background and periphery
do not appear.
L The object gets a greenish tint sometimes when face or hands are near the camera or the
periphery of the door station is dim, however, it is not bug.
L The surface panel may fog up due to a considerable temperature difference with the door
station's surrounding, making the image difficult to see. (This will cease once normal
temperature is restored.)
Installation and Operation Guide
VL-GC003A
Model No.
The protective Face Panel VL-GF001A
shown is not included and must be
purchased separately.
PFQX2295ZA
Door Station
SC1005SK0
Advertisement
Table of Contents
Related Manuals for Panasonic VL-GC003A
Summary of Contents for Panasonic VL-GC003A
-
Page 1: Installation And Operation Guide
Installation and Operation Guide Thank you for purchasing a Panasonic Door Station. Please read this Installation and Operation Guide before using the unit and save for future reference. L Be sure to install the optional Face Panel (VL-GF001A) to avoid malfunction. -
Page 2: Table Of Contents
Table of Contents Important Information Important safety instructions ..........3 Additional safety information . -
Page 3: Important Information
The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. Important safety instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. -
Page 4: Additional Safety Information
Important Information Additional safety information 1. Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 2. Use only the specified AC adaptor. 3. -
Page 5: Installation Introductions
Included items Item Door station Wood screws Inch screws Optional item information Available optional items – Face panel (VL-GF001A-N, VL-GF001A-S, VL-GF001A-B) Installation Introductions Quantity Notes For the door station. (3.8 mm x 20 mm, For the door station. (No. 6-32 UNC x 25 mm / 1") ------ "... -
Page 6: Location Of Controls
Installation Introductions Location of controls Front view A Camera L When a visitor presses the Call Button, the camera will turn on and an image of the visitor will be shown on the display of the monitor station. B Microphone C Screw hole (for fastening the door station to the wall or switch box) D Speaker E Call Button... -
Page 7: Before Installation
Before installation L To avoid malfunction or communication disturbances, do not install the door station in the following locations: – Places where vibration or any other kind of impact occurs. – Places where echoing is frequent. – Places where a high concentration of dust, hydrogen sulfide, phosphorus, ammonia, sulfur, carbon, acid, or noxious fumes occur. - Page 8 Installation Introductions Upper/lower range Side view of the camera facing the front Center of the door station 1450 mm ") 500 mm ") Side view of the camera installed lower than the standard position and facing upward at 15 . Center of the door station 1100 mm...
- Page 9 Note: L The measurements and angles are for reference purposes and may vary depending on the environment. L If a strong light is shining on the door station, the visitor’s face may not be distinguishable. Do not place the door station in the following locations: –...
-
Page 10: Installing The Door Station
Installation Introductions Installing the door station Important: L An optional face panel must be purchased beforehand (page 5). L On the bottom surface of the door station, there is a hole to allow water to drain. Do not cover it up when installing. Connect the wire to the terminal connector. - Page 11 Attach and fix the door station. L Before drilling, see page 7 for installation location. Door station Wood screw Note: L Using the switch box (page 9) is easier to install. Door station Inch screw Installation Introductions " 83.5mm (3 "...
- Page 12 Installation Introductions Install the optional face panel as shown. L Be sure to install the optional face panel (VL-GF001A) to avoid malfunction. 1. Loosen the screw attached to the bottom of the door station. 2. Set the hooks ( ) on the face panel into the slots ( 3.
-
Page 13: Help
Cleaning Use a soft, dry cloth when cleaning. For excessive dirt, wipe the unit with a slightly damp cloth. Important: L Do not use anything containing alcohol, polish powder, powder soap, benzine, thinner, wax, petroleum, or boiling water. Also do not spray with insecticide, glass cleaner, or hair spray. This could cause a change in color or quality. -
Page 14: General Information
General Information Technical data about this product Power supply Dimensions: Mass (Weight): Operating environment: Installation method: External material: Image pickup device: Minimum subject illumination: *1 Supplied from the monitor station. Note: L Design and specifications are subject to change without notice. L The pictures and illustrations in these instructions may vary slightly from the actual product. -
Page 15: Fcc And Other Information
General Information FCC and Other Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. - Page 16 San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, Carolina, Puerto Rico 00985, U.S.A. Copyright: L This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.