Precautions - Panasonic GP-KS822H Operating Instructions Manual

Camera head/camera control unit
Hide thumbs Also See for GP-KS822H:
Table of Contents

Advertisement

PRECAUTIONS

• Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or cover.
There are no user-serviceable parts inside. Refer servicing
to qualified service personnel.
• Do not expose the camera or camera control unit to rain or
moisture, or do not try to operate it in wet areas.
Do take immediate action if ever the camera or camera
control unit do become wet. Turn power off and refer ser-
vicing to qualified service personnel.
Moisture can damage the camera and camera control unit
and also create the danger of electric shock.
• Ambient Temperature range
Do not install the camera in the place which is beyond
10 °C to 45 °C {50 °F to 113 °F}.
• Do not drop anything inside the camera.
Dropping metal for example inside the camera could per-
manently damage the unit.
• Never crush or pinch the camera cable.
Do not bend the camera cable into a curve whose radius
is too small.
• Whether the camera is in use or not, never face it toward
the sun.
Do use caution when operating the camera in the vicinity
of spot lights or other lights and light reflecting objects.
• Do not loosen the chassis of the camera head.
• Do not connect Panasonic GP-KS162CU and GP-KS822H,
nor GP-KS822CU and GP-KS162H.
• How to take care of this camera.
After turning OFF the DC power switch, clean it with a dry
cloth. If it is difficult to remove the dirt or dust, clean it up
with a cloth applied the neutral cleanser.
Use the lens cleaning tissue paper(may be available at
your local camera store) for lens cleaning.
• Connect this to a DC 12 V, min. 600 mA CLASS 2 Power
supply only.
• After using the camera, turn OFF the DC power switch and
put the lens cap on the camera head.
• Every necessary procedures with regard to install this
product should be made by qualified service personnel or
system installers.
Caution:
Connecting or disconnecting camera cable to/from the cam-
era control unit must be done after turning OFF the DC
power switch. Otherwise, the camera head may be dam-
aged.
-6-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp-ks822cu

Table of Contents