Table of Contents
Advertisement
PREPARATIONS
Caution: Keep the DC Power switch of the camera in the OFF
position through the installation.
GP-KS822H with GP-LM3TA, GP-LM7TA, GP-
LM15TA or GP-LP12TA
1. Remove the front cap of the camera and confirm that the
surface of the optical filter of the camera head is clean.
Front Cap
If the surface of the optical filter is dirty or dusts are on it,
clean it up with a blower brush which is for film camera
lenses (may be available at your local camera store) or
supplied lens cleaning tissue paper.
2. Rotate the focus lock ring fully clockwise.
Mount the Pinhole Lens, Wide-angle Lens or Super Wide-
angle Lens to the camera by rotating it clockwise slowly.
Focus Lock Ring
-10-
GP-KS822H with GP-AD22TA and optional C-
mount lens
1. Remove the front cap of the camera head and confirm that
the surface of the optical filter of the camera head is clean.
Front Cap
If the surface of the optical filter is dirty or dusts are on it,
clean it up with a blower brush which is for film camera
lenses (may be available at your local camera store) or
supplied lens cleaning paper.
2. Attach the optional C-mount lens to the C-mount Adaptor
GP-AD22TA by rotating it clockwise.
3. Rotate the focus lock ring fully
Mount the lens and C-mount adaptor by rotating them
clockwise slowly.
Caution: If the optional C-mount lens size exceeds 50.8
mm {2"} in diameter, 70 mm {2-3/4"} in length and 300
g {0.66 lbs} in weight, both the camera and lens
should be secured.
Focus Lock Ring
Advertisement
Table of Contents
