Advertisement

Quick Links

General Information
GENERAL INFORMATION
SERVICE MANUAL INTRODUCTION
This service manual assists with troubleshooting and
diagnosing malfunctions, completion of repairs, and return of
the product to proper operational condition. Read the complete
instructions contained within before initiating any repairs.
This guide is intended for use by Factory Certified Service. Wolf
Appliance, Inc. recommends that repairs be performed by
Factory Certified Service companies only.
Warning and Caution product safety labels appear throughout
this manual. Product safety labels appear at the beginning of
some sections. Follow the instructions in the product safety
labels to avoid personal injury and/or product damage. The
sample safety labels explain the types of notices that appear in
this manual.
WARNING
States a hazard that may cause serious injury or
death if precautions are not followed.
CAUTION
Indicates minor injury or product damage may occur
if instructions are not followed.
IMPORTANT NOTE: Highlights especially important information.
TIP: Indicates additional, useful information.
Information and images contained herein are copyright of Wolf
Appliance, Inc. Neither this manual nor any information or
images contained herein may be copied or used in whole or in
part without the express written consent of Wolf Appliance, Inc.
©
Wolf Appliance, Inc., all rights reserved.
WOLF PRODUCT RATING PLATE INFORMATION
On Ceiling-Mounted Hoods, the rating plate is located behind
the rightmost filter. Open the center panel, and remove the filter.
Important information for each product is listed on the product
rating plate. Rating plates identify:
Model
Serial number
Electrical information, including current draw
825309 REV. B
Wolf V-Series Cooktop Hoods Service Manual
Product
Rating
Plate
V SERIES VENTILATION MODEL KEY
Model Character
ICB
V
C
I
W
36 or 48
B
G
S
W
MODEL DESCRIPTIONS AND SALES ACCESSORIES
For more details on individual model descriptions and a listing
of all compatible sales accessories, see the
Price List
.
PRODUCT USE AND CARE AND INSTALLATION GUIDES
Product Use and Care Guides, Installation Guides, and other
product specifications are available in the
Specifications and Manuals Library
1
service.subzero.com
Description
International Designation
V Series Ventilation
Model Type Ceiling
Model Type Island
Model Type Wall
Width (in inches)
Exterior: Black
Exterior: Glass
Exterior: Stainless Steel
Exterior: White Glass
Wolf Distributor
Product
.

Advertisement

Table of Contents
loading

Summary of Contents for Wolf V Series

  • Page 1 Read the complete instructions contained within before initiating any repairs. This guide is intended for use by Factory Certified Service. Wolf Appliance, Inc. recommends that repairs be performed by Factory Certified Service companies only.
  • Page 2: General Information

    Wolf V-Series Cooktop Hoods Service Manual General Information service.subzero.com UNIT WARRANTY Product warranty is determined by the installation location and the date of installation. http://service.subzero.com/ ▪ View product warranties at ClaimsAndOrderProcessing/Pages/WarrantyInfo Warranties start on the day of product installation. ▪...
  • Page 3: Component Access And Removal

    Wolf V-Series Cooktop Hoods Service Manual Component Access and Removal service.subzero.com COMPONENT ACCESS AND REMOVAL FILTER REMOVAL This section explains how to access and remove components from a Wolf Ceiling-Mounted Hood. Remove the Filter WARNING Push the plastic tab on the front end of the filter toward the To avoid electric shock, disconnect power to the rear of the hood, and gently pull down.
  • Page 4 Wolf V-Series Cooktop Hoods Service Manual service.subzero.com REMOVE THE LED LIGHT ASSEMBLY (STAINLESS STEEL) (continued) Use a flat-head screwdriver to pry the LED light assembly away from the stainless steel panel. CONTROL ASSEMBLY REMOVAL Remove the Control Assembly Use a Phillips screwdriver to remove the screws holding the control assembly to the frame.
  • Page 5: Transformer Removal

    Wolf V-Series Cooktop Hoods Service Manual service.subzero.com ACCESS THE AREA ABOVE THE EASY CUBE (continued) Remove the two screws at the bottom of the lower chimney. Raise and block the lower chimney up on island hoods, and remove the lower chimney on wall hoods.
  • Page 6 Wolf V-Series Cooktop Hoods Service Manual service.subzero.com REMOVE THE INNER PANEL MAGNET (continued) Turn the magnet counterclockwise to remove it. Remove the inner panel from the unit. INNER PANEL MAGNET INSTALLATION INNER PANEL INSTALLATION Install the Inner Panel Magnet Install the Inner Panel Place the magnet anchor under the inner panel magnet Place the inner panel over the hinges.
  • Page 7: Mounting Bracket Installation

    Wolf V-Series Cooktop Hoods Service Manual service.subzero.com INNER PANEL HINGE INSTALLATION OUTER PANEL INSTALLATION Install the Inner Panel Hinge Install the Outer Panel Place the frame hinge leaf onto the unit. Place the outer panel on the unit. Use a Phillips screwdriver to install the frame hinge leaf to Use a Phillips screwdriver to install the screws around the the frame.
  • Page 8 Wolf V-Series Cooktop Hoods Service Manual service.subzero.com INSTALL THE MOUNTING BRACKET (continued) Use the " length screws to secure the brackets. Secure the damper with duct sealing tape. LOWER MOUNTING BRACKET REMOVAL WIRE HARNESS REMOVAL Remove the Lower Mounting Bracket Remove the Wire Harness Disconnect the LED light wire harnesses.
  • Page 9 Wolf V-Series Cooktop Hoods Service Manual service.subzero.com INSTALL THE WIRE HARNESS (continued) Install the cover over the J-box. Connect the wire harnesses to the power board assembly. Install the four screws holding the power board assembly case together. Connect the ribbon cable, and close the ribbon cable cover.
  • Page 10: Troubleshooting Guide

    Wolf V-Series Cooktop Hoods Service Manual Troubleshooting Guide service.subzero.com TROUBLESHOOTING GUIDE This section explains how to troubleshoot various components in a Wolf Ceiling-Mounted Hood. WARNING To avoid electric shock, disconnect power to the hood when preparing for tests. Care should be used while performing any test with the hood energized.
  • Page 11 Wolf V-Series Cooktop Hoods Service Manual service.subzero.com CEILING-MOUNTED HOOD TROUBLESHOOTING TABLE Symptom Diagnostic Test Resolution Check the batteries. If necessary, replace with two new AAA batteries. Verify the blower and lights are turned off. Remote control does not Press and hold on the hood for five seconds.
  • Page 12 Wolf V-Series Cooktop Hoods Service Manual service.subzero.com Symptom Diagnostic Test Resolution L1 to ground = 115 VAC ▪ ▪ N to ground = 0 VAC L1 to N = 115 VAC ▪ Check voltage at the power cable: ▪ L1 to ground = 115 VAC Replace or repair the electrical connector or wires.
  • Page 13: Technical Data

    Wolf V-Series Cooktop Hoods Service Manual Technical Data service.subzero.com TECHNICAL DATA VC36/48 S/W TECHNICAL DATA VC36/48 S/W TECHNICAL DATA Parameter Value AC power 400 W, 3.2 A Min. - max. ceiling height 5' 11'' - 10' Convertible to ductless/recirculating? Yes, kit sold separately Hood width/depth (VC36) "...
  • Page 14: Wiring Diagrams

    Wolf V-Series Cooktop Hoods Service Manual Wiring Diagrams service.subzero.com WIRING DIAGRAMS BASIC WIRING 115 VAC comes in through the junction box, then plugs into the electrical box. It is wired to the power board with a three-wire harness. For internal blowers, 115 VAC is sent from the power board to the blower.
  • Page 15 Wolf V-Series Cooktop Hoods Service Manual Wiring Diagrams service.subzero.com VC36/48 W/S WIRING DIAGRAM 825309 REV. B...

This manual is also suitable for:

Vc48w

Table of Contents