Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell Inspiron 14 3420 Service Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the M.2 2230 solid-state drive
4. Remove the battery.
5. Remove the display assembly.
6. Remove the heat sink.
7. Remove the speakers.
8. Remove the touchpad
9. Remove the I/O board.
10. Remove the I/O board
11. Remove the power button.
12. Remove the system board.
NOTE: The system board can be removed and installed together with the heat sink attached.
About this task
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the pre-requisites, you are left with the palm-rest and keyboard assembly.
Before working inside your
or M.2 2280 solid-state drive
assembly.
cable.
computer.
from M.2 card slot, whichever applicable.
Removing and installing components 41