JVC HR-S9400EE Instructions Manual page 48

48
EN
CAN CEL
M EN U
Downloaded from: https://www.usersmanualguide.com/
2
1 2 3
4 5 6
7 8 9
0
4
EN D R.A. EDIT
12
Press M EN U to return to the normal screen, and engage
the Stop mode for your recorder and for the recording
deck.
N O TES:
● You can also monitor the sound when searching for scenes
you want to edit in steps 8 – 9 . Since you can hear the
soundtrack during selection, you can avoid abrupt or
unnatural sounding scene-to-scene transitions. The sound that
is heard, however, is not TimeScan Audio.
● When editing, there may be a discrepancy of about 2 seconds on
the source tape between the locations you chose as edit-in/-out
points and the locations your recorder recognizes as those points.
● For any scene, the edit-out point must have a counter reading
that is at least 1 second after the corresponding edit-in point. Any
less than 1 second and the edit-out point will not be registered.
● Since the source recorder prerolls during Random Assemble
Editing, there must be at least 15 seconds worth of recorded
material prior to any edit-in point on the source tape.
● If the search time for an edit-in point exceeds 5 minutes, the
recording deck enters its Stop mode and editing will not take place.
● During steps 8 and 9 — if you engage the Pause mode while
registering edit-in and -out points in the R.A. Edit screen, the
characters in the on-screen display may become distorted. This
is normal.
RM -V7 0 4 M ulti-Bra nd R.A. Edit Controller (N ot
provided)
By connecting this controller to your recorder's R.A. EDIT
connector, you can perform Random Assemble Editing in
combination with a second non-J VC video recorder. The controller
is compatible with various major recorder brands. For compatible
systems and availability, please consult your J VC dealer.
N O TE:
Although the RM-V704 is designed to operate the recording
deck, it may not work with some recorders, or may have limited
function capability.
ED ITIN G (cont.)