JVC HR-S9400EE Instructions Manual page 31

● Make sure the channel position number you wish to
record is displayed; if not, see "S
page 28 and set the Guide Program number for that
S V
HOW IEW
● If the number you entered is invalid, "ERROR"
appears on the screen and "Err" appears on the
display panel. Press CAN CEL to backspace and input
a valid S
HOW
● If "ERROR=GUIDE PROG" appears on the screen, see
"ATTENTION – Regarding Guide Program Number
Set" on this page.
SET TAPE SPEED
4
Press SP/ LP (
RETURN TO N O RMAL SCREEN
5
Press O K .
● Repeat steps
EN GAGE RECO RDER'S TIMER
MO DE
6
Press TIM ER . The recorder turns off automatically.
N O TE:
To Delay The Stop Time . . .
. . . press AD D TIM E ( N U M BER Key "5") after pressing O K in
step 3 . Each time you press, the Stop time is delayed by 5
minutes (meaning that 5 minutes of recording time is added).
You can easily compensate for anticipated programme schedule
delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing O K in step 3 , press W EEKLY ( N U M BER key
" 9" ) for weekly serials or D AILY ( N U M BER key " 8" ) for daily
serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears
on the screen. Pressing the button again makes the correspond-
ing indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (
Downloaded from: https://www.usersmanualguide.com/
V
HOW IEW
number correctly.
V number.
IEW
) to set the tape speed.
1 – 5 for each additional programme.
ATTEN TIO N
Setup" on
Regarding Guide Program N umber Set
"ERROR=GUIDE PROG" appears after performing step 3 on
the previous page if the Guide Program number for the
S V
HOW
● If the recorder is in the stop or rewind or fast-forward
mode, the following screen will appear with "– –" under
"TV PROG" blinking.
• Press the
channel position number your recorder receives that
station on, then press O K .
GUIDE PROG
[5 ∞ ] =
[MENU] : EXIT
• Press
● If the recorder is in a mode other than the above mentioned
modes, press MENU first and input the correct Guide
Program number for that S
"S
HOW
Satellite Tuner U sers
To timer-record a satellite broadcast using S
● Before you start step
mode to "AUX2" (
mode until the selected programme has been timer-
recorded.
● Before the selected programme begins, select the
appropriate channel on the satellite tuner, and then set
the tuner's timer. If your satellite tuner does not have a
timer, leave the unit's power on.
pg. 34).
number you entered has not been set.
IEW
N U M BER keys or PU SH JO G
GUIDE PROG SET
(Ex.) To timer-record a RTR
programme with S
TV PROG
* If your recorder receives
2 – –
RTR on the channel
position 2, press O K after
entering "2".
M EN U , then try again from step 1 .
V
HOW IEW
V Setup"), then try again from step 1 .
IEW
1 , be sure to set the recorder's input
pg. 39). Do NOT change the input
31
EN
%fi to input the
V
HOW IEW
number ( pg. 28,
V :
H O W IEW