Starting The Programme; Adding Laundry; Cancelling The Programme; Unloading The Laundry - Bosch WGA144XVEG User Manual

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press ⁠ Start/Reload .
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.

Adding laundry

Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Press ⁠ Start/Reload .
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→ "Display", Page 20
Add or remove laundry.
2.
Close the door.
3.
Press ⁠ Start/Reload .
4.

Cancelling the programme

Once the programme has started,
you can cancel it at any time.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Press ⁠ Start/Reload .
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the ⁠ Rinse programme.
– If the water level is high: Start
the Spin or Drain pro-
gramme.
Remove the laundry.
3.

Unloading the laundry

Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Open the door.
1.
Remove the laundry.
2.

Switching off the appliance

Turn the programme selector to
1.
Off .
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Basic operation en
37