Bosch WGA14400TH User Manual And Installation Instructions

Advertisement

Quick Links

Washing machine
WGA14400TH
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WGA14400TH

  • Page 1 Washing machine WGA14400TH [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Further information and explanations are available online: Table of contents 1 Safety ...........  4 8 Buttons ........  23 1.1 General information.... 4 9 Programmes ......  25 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories......  29 1.4 Safe installation ...... 5 11 Laundry........  29 1.5 Safe use ........
  • Page 3 16 Cleaning and servicing ...  34 16.1 Cleaning the drum.... 34 16.2 Cleaning the detergent drawer........ 34 16.3 Cleaning the drain pump.. 35 17 Troubleshooting......  39 17.1 Emergency release .... 48 18 Transportation, storage and disposal ........  48 18.1 Removing the appliance .. 48 18.2 Inserting the transit bolts..
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk.
  • Page 10: Preventing Material Damage

    en Preventing material damage If the water pressure is too high or 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least ATTENTION! 100 kPa (1 bar) and max.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Set the maximum spin speed if you 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter the programme duration when dry- 3.1 Disposing of packaging ing which, in turn, reduces energy consumption.
  • Page 12: Contents Of Package

    en Installation and connection Remove any packaging and pro- ¡ Water inlet hose tective covers completely from the → "Connecting the water inlet appliance. hose", Page 14 → "Disposing of packaging", 4.3 Requirements for the in- Page 11 stallation location Check the appliance for visible damage. Open the door.
  • Page 13: Removing The Transit Bolts

    Installation and connection en Pull the hoses out of the holders. Installation loca- Requirements tion Wooden joist Place the appli- floor ance on a water- resistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Kitchen unit Only install the appliance under- neath a continu-...
  • Page 14: Connecting The Appliance

    en Installation and connection Remove the 4 sleeves. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. Open the water tap carefully and check that the connection points are tight.
  • Page 15: Aligning The Appliance

    Installation and connection en Note: Observe the draining heights. 4.6 Aligning the appliance The maximum draining height is In order to reduce noise and vibra- 100 cm. tion and to prevent the appliance Siphon Secure the con- from moving, align the appliance cor- nection point with rectly.
  • Page 16 en Installation and connection Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight. In doing so, hold the foot tight and do not adjust its height.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 35 Note: Observe the manufacturer's in-...
  • Page 18: Control Panel

    en Familiarising yourself with your appliance Measuring aid for liquid deter- gent Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash and soaking 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
  • Page 19: Before Using For The First Time

    first time en Add washing powder that contains first time 6 Before using for the a bleaching agent to compart- ment II. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry.
  • Page 20: Display

    en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. Programme end → "Buttons", Page 23 time Recommended The maximum load capacity for the selec-...
  • Page 21 Display en Display Designation More information Wash Programme status Rinse Programme status Spin Programme status End of pro- Programme status gramme Steaming Programme status Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated.
  • Page 22 en Display Display Designation More information Reminder to clean Flashes: Drum is dirty. Run the ⁠   Drum the drum Clean / ล้ า งถั ง ซั ก programme for cleaning and caring for the drum and the outer tub. → "Cleaning the drum", Page 34 ⁠...
  • Page 23: Buttons

    Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information ⁠   Start / Re- ¡ Start Start, cancel or pause the pro- load / Pause gramme. ¡ Cancel ¡ Pause ⁠   Speed Perfect ¡ Activate Activate or deactivate a shorter pro- gramme duration.
  • Page 24: Programmes

    en Buttons Button Selection More information ⁠   Pretreatment (Prewash) Selecting activates the Prewash ¡ programme. (Soaking) ¡ Prewash for washing heavily soiled laundry. Selecting activates the Soaking programme. Before the main wash cycle starts, the laundry remains in the water for longer.
  • Page 25 Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cottons / ผ้ า คอ Wash hard-wearing items made from cotton, linen or blended fabrics. ตต้ อ น  Also suitable as a short programme for normally soiled laundry when you activate ⁠...
  • Page 26 en Programmes Programme Description Max. load (kg) Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm ⁠   Wool / ซั ก Hand- or machine-washable items that are made ถนอมผ้ า ขนสั ต ว์   from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses.
  • Page 27 Programmes en Programme Description Max. load (kg) ⁠   Steam Suitable for shirts, T-shirts and similar fabrics made (Easy Ironing from cotton, linen or blended fabrics. Steam Assisted) Programme for warming and steaming dry items using steam in order to hang them up once the programme has ended or to make them easier to iron.
  • Page 28 en Programmes Programme Description Max. load (kg) Use washing powder that contains bleach. Add the washing powder containing bleach to compartment II for the main wash. → "Detergent drawer", Page 17 Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use liquid detergent or detergent that is in- tended for woollens or delicates.
  • Page 29: Preparing The Laundry

    Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 49. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx.
  • Page 30: Basic Operation

    en operation ¡ Do not mix different liquid deter- Adjust the programme settings. ▶ gents → "Buttons", Page 23 ¡ Do not mix detergent and fabric Note: The programme settings are softener not saved permanently for the pro- ¡ Do not use products that have ex- gramme.
  • Page 31: Adding Laundry

    Childproof lock en a The drum rotates and load detec- Remove the laundry. tion takes place. This can take up → "Unloading the laundry", to 2 minutes, after which water Page 31 enters the drum. a The display shows the programme 13.9 Unloading the laundry duration or the programme end Open the door.
  • Page 32: Deactivating The Childproof Lock

    en Childproof lock a The childproof lock remains active even after the appliance has been switched off and in the event of a power cut. 14.2 Deactivating the child- proof lock Requirement: To deactivate the childproof lock, the appliance must be switched on. Press and hold the two ⁠...
  • Page 33: Basic Settings

    Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
  • Page 34: Changing The Basic Set- Tings

    en Cleaning and servicing 15.2 Changing the basic set- 16 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. ciently for a long time, it is important to clean and maintain it carefully. 16.1 Cleaning the drum CAUTION Risk of injury!
  • Page 35: Cleaning The Drain Pump

    Cleaning and servicing en Press down on the insert and re- Fit the insert and click it into place. move the detergent drawer. Clean the opening for the deter- Pull out the insert upwards. gent drawer. Clean the detergent drawer and in- Push in the detergent drawer.
  • Page 36 en Cleaning and servicing Open and remove the service flap. CAUTION - Risk of scalding! When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
  • Page 37 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 35 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
  • Page 38 en Cleaning and servicing Insert the mains plug. Before the next wash Switch on the appliance. To prevent unused detergent from Pour 1 litre of water into compart- flowing straight into the outlet in the ment II. next wash, run a suitable programme for draining after you have emptied Select a suitable programme for the drain pump.
  • Page 39: Troubleshooting

    Troubleshooting en 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 40 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 41 Troubleshooting en Fault Cause and troubleshooting lights up. The temperature is too high. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 31 ▶ Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 25 flashes. Door is not closed. Close the door.
  • Page 42 en Troubleshooting Fault Cause and troubleshooting The programme does You have not pressed  ⁠   Start / Reload / Pause. not start. Press ⁠   Start / Reload / Pause. ▶ Door is not closed. Close the door. ▶ Childproof lock is activated. Deactivate childproof lock.
  • Page 43 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Reduce the amount of detergent for the next wash- ▶ ing. ing cycle with the same load. Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶...
  • Page 44 en Troubleshooting Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
  • Page 45 Troubleshooting en Fault Cause and troubleshooting The spin programme Ensure that the drain pipe and water drain hose are ▶ does not start. not kinked or trapped. The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distrib- uted.
  • Page 46 en Troubleshooting Fault Cause and troubleshooting The spin result is not A low spin speed is selected. satisfactory. The laun- The next time you run a wash cycle, set a higher ▶ dry is too wet/too spin speed. damp. Start the Spin / ปั ่ น หมาด programme. ▶...
  • Page 47 Troubleshooting en Fault Cause and troubleshooting Odours have formed Humidity and detergent residue may promote the in the appliance. formation of bacteria. → "Cleaning the drum", Page 34 ▶ If you are not using the appliance, leave the door ▶ and detergent drawer open so that residual water can evaporate.
  • Page 48: Emergency Release

    en Transportation, storage and disposal 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 35 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
  • Page 49: Disposing Of Old Appliance

    Customer Service en 18.4 Disposing of old appli- 19 Customer Service ance Detailed information on the warranty Valuable raw materials can be re- period and terms of warranty in your used by recycling. country is available from our after- sales service, your retailer or on our WARNING website.
  • Page 50: Consumption Values

    en Consumption values 20 Consumption values The indicated consumption values are approximate. The values may deviate from the indicated values depending on water pres- sure, water hardness, water inlet temperature, room temperature, type of laun- dry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings.
  • Page 51: Technical Data

    Technical data en Length of the wa- 150 cm Length of the 160 cm ter inlet hose power cord Length of the wa- 150 cm ter outlet hose...
  • Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents