Epson EB-PU1006W User Manual page 274

On/Standby Status Laser
(power) light light light
Flashing blue Varies Varies
Off Flashing Off
blue
Flashing blue Varies Flashing
orange
Flashing blue Varies Flashing
orange
Varies Varies Varies
Varies Varies Flashing
orange
Off Flashing Orange
blue
Temp light Filter Status and solution
light
Varies Orange Low air flow through the air filter
• Make sure that the vents and air
• Clean or replace the air filter
• If the problem persists, unplug the
Flashing Off Fan or sensor error; turn the
orange projector off, unplug it, and contact
Epson for help
Varies Varies Laser error; turn off the projector,
unplug it, and contact Epson for help
Varies Varies An unsupported lens is attached;
remove the unsupported lens and
attach a lens that is supported
Varies Flashing A message to clean or replace the air
orange filter is displayed; turn the projector
off, unplug it, and clean or replace
the air filter as necessary
Varies Varies The projector is unable to maintain
constant brightness and the
Constant Brightness setting in the
Settings menu is disabled
Orange Off Lens problem or no lens is installed
• Remove and reattach the installed
• Attach a supported lens
• If the problem persists, unplug the
274
filter are not clogged with dust or
obstructed by nearby objects
projector and contact Epson for
help
lens
projector and contact Epson for
help