Epson EB-PU1006W User Manual page 159

3. Press the Menu button.
4. Select the Settings menu and press
5. Select the Content Playback setting and press
6. Select the On setting and press
You see a confirmation prompt.
7. Turn off the projector.
8. Turn on the projector again to enable Content Playback mode.
9. Press the Home button to make sure Content Playback mode is enabled.
10. Insert the USB device containing the playlist to the projector's USB-A port.
11. Press the user button assigned to USB on the remote control to project the playlist.
Note: To assign the USB option to a user button on the remote control, press the Menu button and
go to Settings > User Button.
Note: To select a specific playlist from the USB device, press the Menu button and go to Settings >
Content Playback > USB Viewer. Use the arrow buttons on the remote control to select the playlist
you want to project.
If there is more than one playlist on the USB device, the first or scheduled playlist is projected.
Parent topic: Projecting in Content Playback Mode
Enter.
Enter.
Enter.
159