Panasonic PT-AE1000U Operating Instructions Manual page 13

Back and bottom view
Air intake port
Front leg adjusters
Screw up/down to adjust the
projection angle. (page 21)
SERIAL
Connect a compatible cable
for controlling the projector
remotely via your PC.
Connecting
terminals
(page 18)
HDMI IN
Connect HDMI signal cables.
NOTE:
Do not cover the ventilation openings or place anything within 50 cm (20") of the vents as this may cause
damage or injury.
This projector should only be used with the attached Power cord to ensure optimum performance and avoid
damage to the projector.
Do not open the Top cover other than replacing the lamp unit.
Security lock
Attach the commercial shackle
lock, manufactured by
Kensington, to protect your
projector. Compatible with the
Kensington MicroSaver Security
System.
PC IN
Connect an RGB signal
cable from your PC.
COMPONENT 2 IN
Connect a YPBPR signal cable.
About Your Projector
Top cover
Hold at the back corner of the Top
cover and slightly push up to
open. (page 42)
AC IN
Connect the Power cord to
supply electronic power to
the projector. (page 19)
Lens cover attachment hole
COMPONENT 1 IN
Connect a YPBPR signal
cable.
S-VIDEO IN
Connect a S-VIDEO
signal cable.
VIDEO IN
Connect an RCA
composite video cable.
Air intake port
E - 13
NGLISH