Settings; Installing The Batteries; Connecting The Handset/Telephone Line Cord - Panasonic KX-TSC11 Operating Instructions Manual

Settings

Installing the Batteries

2
• Batteries are not included in the unit.
• Install three high quality "AA" size Alkaline (LR6) or Manganese (R6, UM-3)
batteries. We recommend to use Panasonic Alkaline batteries.
Battery life is: —about six months in use of Alkaline batteries.
Battery life may depend on usage conditions and ambient temperature.
• Make sure batteries were inserted properly to ensure the functionality of this unit.
THE UNIT MAY NOT WORK PROPERLY WITHOUT BATTERIES.

Connecting the Handset/Telephone Line Cord

After connection, lift the handset to check for a dial tone.
To Single-Line
Telephone Jack
(RJ11C)
If you subscribe to an xDSL service
Please attach a noise filter (contact your xDSL provider) to the telephone line
between the base unit and the telephone line jack in the event of the following:
— Noise is heard during conversations.
— Caller ID features (p. 16) do not function properly.
6
1
—about three months in use of Manganese batteries.
Noise filter
(For xDSL users)
1
Press down in the direction of the arrow
and remove the battery cover ( ).
2
Install the batteries in the proper order
as shown ( ), matching the correct
2
polarity.
3
Close the battery cover.
Telephone Line
Cord
1
Handset
Handset Cord