Samsung SCP-3250 User Manual page 31

Z6806126301A-SCP-3250(P)-ENGLISH31 31 Z6806126301A-SCP-3250(P)-ENGLISH31 31
FOCUS MODE
You can select a focus mode according to the
angle that you adjusted for camera recording.
- AF : This will monitor the screen continuously
to focus automatically. If you adjust the focus
manually, that will operate the same as in
<MF>. This will also restore focus after the
operation of pan/tile/zoom.
- SENSITIVITY : Indicates the sensitivity of auto
focus, which you can adjust between level 1
and level 7.
The closer your setting is to 7, the more
sensitively the auto focus function performs.
The Night setting is used when a strong light
reflects in a low contrast scene.
You can set it to OFF, LOW, MEDIUM, or
HIGH; set it to <HIGH> when there exist a
strong light such as street light.
- ONEAF : Restores focus after the operation
of pan/tile/zoom, and operates the same as
in <MF> unless the operation of pan/tile/
zoom is executed.
- MF : You can adjust the focus manually.
M

While you are working on the following objects, <AF> may not work properly.
If this is the case, use <MF> instead.
- Very bright object, or dominant object in a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects
ZOOM SPEED
You can adjust the zoom operation speed.
DISPLAY ZOOM
You can set to display the zoom status on the screen.

It will disappear in about 3 seconds if the zoom factor has no further change.
DAY/NIGHT DAY/NIGHT
WHITE BAL WHITE BAL
FOCUS MODE
ZOOM SPEED ZOOM SPEED [2] [2]
DISPLAY ZOOM DISPLAY ZOOM
DISPLAY P/T DISPLAY P/T
DIGITAL ZOOM DIGITAL ZOOM
DETAIL DETAIL
V-SYNC V-SYNC
AF AF
SENSITIVITY [5]
NIGHT NIGHT
English _31
AUTO AUTO
AF
OFF OFF
OFF OFF
X16 X16
[2] [2]
INT INT
MID MID
2010-05-04 오후 2:59: 2010-05-04 오후 2:59: