Table of Contents
Advertisement
34
EN
EJECT Switch
Power lamp
Battery pack remaining power indicator
Tape counter
Recording mode indicator
S ET
M 1 : 23 : 45
TAPE END
VOLUNE
Viewfinder indications
Downloaded from:
REW (2) Button
FF (3) Button
PLAY/PAUSE (4/6)
Button
STOP (5) Button
Power Switch
Tape running indicator
SP
4
4 : Playback
AT
3 : Fast-Forward/
Forward Search
2 : Rewind/Reverse
Search
6 : Still Playback
https://www.usersmanualguide.com/
PLAYBACK
1
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
2
SELECT MODE
Set the Power Switch to "PLAY". The power lamp
lights.
3
PLAY BACK
Press PLAY/PAUSE (4/6). The playback picture
appears.
4
STOP PLAYBACK
Press STOP (5).
Rewind or Fast-Forward the tape
Press REW (2) to rewind, or FF (3) to fast-forward the
tape during Stop mode.
NOTES:
● The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to "POWER OFF", then to "PLAY".
● If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
Basic Playback
Advertisement
Table of Contents
