JVC GR-FX10 Instructions Manual page 17

Downloaded from:
RETAKE (R/F) Button
https://www.usersmanualguide.com/
Quick Review
FEATURE:
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Press " " and release quickly during the Record–
Standby mode.
Tape is rewound for about 1 second and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
Retake
FEATURE:
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point
for new recording. Pressing "F" forwards the tape
and pressing "R" reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
17
EN