Table of Contents
Advertisement
14
EN
EJECT Switch
Recording Start/Stop Button
Power lamp
Power Switch Position
According to the Power Switch position you have selected, the following functions are available:
AUTO
(Full Auto mode):
Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.
Downloaded from:
LENS COVER
Open/Close Ring
Power Switch
Tally lamp
(lights while recording
is in progress)
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.
https://www.usersmanualguide.com/
RECORDING
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (
pg. 6)
● Tape Length Setting (
● Recording Mode Setting (
● Grip Adjustment (
● Viewfinder Adjustment (
1
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
2
ENTER RECORD-STANDBY MODE
Turn the LENS COVER Open/Close Ring to open the
lens cover, then set the Power Switch to "CAMERA"
("AUTO" or "PRO.").
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears on the
viewfinder screen, with the word "PAUSE"
superimposed upon it.
3
START SHOOTING
Press the Recording Start/Stop Button.
•"
" appears in the viewfinder while recording is
in progress.
PRO.
(PRO. mode):
Basic Recording
pg. 10)
pg. 10)
pg. 12)
pg. 12)
POWER OFF:
Allows you to switch off the
camcorder.
Advertisement
Table of Contents
