Panasonic KX-TG7431 Operating Instructions Manual page 44

Digital cordless answering system
Hide thumbs Also See for KX-TG7431:
Table of Contents

Advertisement

Useful Information
Problem
The caller list/incoming
phone numbers are not
edited automatically.
I cannot dial the phone
number edited in the caller
list.
Time on the unit has
shifted.
The 2nd caller's
information is not
displayed during an
outside call.
Answering system
Problem
The unit does not record
new messages.
I cannot operate the
answering system.
44
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 20).
L You need to call back the edited number to
activate Caller ID number auto edit.
L The phone number you dialed might have been
edited incorrectly (for example, the long distance
"1" or the area code is missing). Edit the phone
number with another pattern (page 28).
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
"Manual" (off) (page 22).
L In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
Cause/solution
L The answering system is turned off. Turn it on
(page 30).
L The message memory is full. Erase unnecessary
messages (page 31).
L The recording time is set to "Greeting only".
Change the setting (page 35).
L If you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit's
number of rings setting or contact your service
provider/telephone company (page 35).
L Someone is using the unit. Wait for the other user
to finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move
closer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents