Controller Discovery - Fortinet FortiAP FAP-U24JEV Quick Start Manual

Controller Discovery

• If FortiWLC controller is discovered, the unit continues booting up with the default FortiWLC
image.
• If the FortiGate or the FortiCloud controller is discovered, the unit reboots with the FortiAP
image.
For the FortiAP to discover the FortiCloud controller, you need to add the unique FortiCloud key
labelled on the device to the FortiCloud. See section
For the FortiAP to complete the FortiGate discovery, you need to authorize the FortiAP on the
FortiGate Deployment
FortiGate. See section
To bring the FortiAP back to factory default setting, insert a pin into the reset point on the power
adapter and hold on for 10 seconds. Release the pin.
On the FortiAP image, run the
The FortiAP boots up with the default FortiWLC AP image
and tries to discover the FortiWLC, FortiGate, and FortiCloud
controllers simultaneously.
The FortiAP connects to the controller that is first
discovered.
FortiCloud Deployment
.
reload default factory
command to reset the FortiAP to factory default.
9
.