Making Calls; System Capabilities (Operating More Than One Handset); Using The Handset - Panasonic KX-TG5100M Operating Instructions Manual

Making Calls

System Capabilities
Generally a maximum of 4 extensions excluding or including the base unit can operate
at a time. If 4 other extensions are in use, such as conducting a call, you may not be
able to use your unit. "System is busy. Please try again later." will be
displayed when you try to operate your unit. The maximum operating number may
decrease, depending on the state of usage, such as using the Reception Booster
mode (p. 25), or when the Answering System is taking a call.

Using the Handset

1
Press
[
• "Talk" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3
To hang up, press [OFF] or place
the handset on the base unit or the
charger (KX-TG5110M only).
To have a hands-free phone
conversation
1
Press
[
• "SP-phone" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3
When the other party answers, talk
into the microphone.
4
To hang up, press [OFF] or place
the handset on the base unit or the
charger.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Talk alternately with the caller in a quiet room.
• If you or the other party has difficulty hearing, press [ ] to decrease the
speaker volume.
• While talking using [
by pressing [
24
Handset
.
]
.
]
], you can switch to the hands-free phone conversation
]. To switch back to the receiver, press [
(Operating More Than One Handset)
[ ]
[ ], [ ], [ ], [ ]
[OFF]
[HOLD] (CLEAR)
[ ]
[PAUSE/REDIAL]
Microphone
].