Direct Remote Operation - Panasonic KX-TG2583 Operating Instructions Manual

Remote Operation from a Touch Tone Phone

Direct Remote Operation

Once you have entered the remote code, you can also control your unit
by direct commands instead of using the voice menu. To end the remote
operation, hang up anytime.
Direct commands
NEW MESSAGE
PLAYBACK
ALL MESSAGE
PLAYBACK
REPEAT
(During playback)
SKIP
(During playback)
STOP
GREETING
MESSAGE
RECORDING
ERASING A
SPECIFIC
MESSAGE
(During playback)
ERASING ALL
MESSAGES
64
•Only new messages are played back.
(4)
•All messages are played back.
(5)
•The current message is repeated.
(1)
•The current message is skipped.
(2)
The next message is played.
•Operation is stopped temporarily.
(9)
•To resume operation, enter a direct
command within 15 seconds, or the
voice menu will start.
•A long beep sounds.
(7)
[
•After the beep, talk immediately for up to
RECORD
2 minutes.
[
•The recording is stopped.
(9)
•The recorded message is played.
•The current message is erased.
(*) (4)
•A short beep will sound and the next
message will be played.
•All recorded messages are erased.
(*) (5)
•A long beep sounds and "No messages" is
heard.