Paper Low In Tray 1 / Paper Is Low In Tray 1. Load Paper; Paper Empty In Tray 1 / Paper Is Empty In Tray 1. Load Paper; Paper Empty In Mp Tray / Paper Is Empty In Mp Tray. Load Paper - Samsung ProXpress M4030 Series Service Manual

4. Troubleshooting
► Error Code
M1-5111 / M1–5112
► Error message

Paper Low in tray 1 / Paper is low in tray 1. Load paper

Paper Empty in tray 1 / Paper is empty in tray 1. Load paper

► Symptom
There is no paper in the tray1. / Actuator-Paper Empty or photo sensor is defective.
► Troubleshooting method
1) Load the paper in the tray1.
If the problem persists, check the followings after turning the machine off.
2) If the ACTUATOR-EMPTY PICK UP is defective, replace it.
3) Check if the empty sensor harness is connected correctly. Reconnect it.
4) If the empty sensor is defective, replace it. Check if the connector is connected properly.
► Error Code
M1–5612
► Error message

Paper Empty in MP tray / Paper is empty in MP tray. Load paper

► Symptom
There is no paper in the MP tray (or Manual Feeder). / Actuator-Paper Empty or photo sensor is defective.
► Troubleshooting method
1) Load the paper in the tray1.
If the problem persists, check the followings after turning the machine off.
2) If the LEVER-MP EMPTY(JC66-04790A) is defective, replace it.
3) Check if the MP empty sensor harness is connected correctly. Reconnect it.
4) If the MP empty sensor(0604-001393) is defective, replace it.
5) If necessary, replace the MP Unit.
4-58 Copyright© 1995-2017 SAMSUNG. All rights reserved.