Installing The Sd Vflash Card - Dell E01B002 Owner's Manual

Figure 21. Replacing the SD vFlash card
a. SD vFlash slot
b. SD vFlash card
Next steps
Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system
After working inside your system

Installing the SD vFlash card

Installing the SD vFlash card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in System Setup.
Steps
1. Locate the SD card connector on the internal dual SD module. Align the SD card appropriately and insert the contact-pin end
of the card into the slot.
on page 48
on page 49
on page 73
Installing and removing sled components 73