Seagate ST6000NM0134 Product Manual page 2

Document Revision History
Revision Date
Rev. A 05/14/2014
Rev. B 10/14/2014
Rev. C 05/14/2015
Rev. D 06/05/2015
Rev. E 10/07/2015
Rev. F 09/01/2016
Rev. G 01/10/2018
© 2018 Seagate Technology LLC. All rights reserved.
Publication number: 100726011, Rev. G January 2018
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Raid Rebuild and SeaTools are either
trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST,
which does not imply product endorsement by NIST, the U.S., or Canadian governments.All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and
other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more
information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Pages affected and Description of changes
Initial release.
13 & 17-18.
fc & bc: Applied new logo
8: Korean RRL cert info added
19: Revised Thermal monitor text
37: Revised Corrosive environment text
fc & 6: FIPS Certification complete, removed "Review Pending"
5: Updated Support URLs
38: Figure 13 - Revised penetration depth (.14 max)
fc, 6 & 54: Add 5xxE models - ST6000NM0134 & ST4000NM0134
7: Updated Australian RCM statement
8: Revised Korean Compatibility statement
9: Updated to China RoHS 2
22: Updated Storage statement
52: Changed Information Exception Log Page 2Fh to "Y"
64: Corrected characters in LED table
8-12: Updated Sections 2.0 through 2.4, (Safety, EMC, FCC, China & Reference documents)
per Compliance Council
10 & 12: Added Section 2.1.10 Taiwan BSMI & Section 2.3.3 Taiwan Requirements — Taiwan RoHS
49: Section 10.0 Corrected fastener penetration depth to 0.140in (3.56mm)