Table of Contents
Advertisement
Making Calls
To put a call on hold
Press
(HOLD/CLEAR).
•"Line on hold" is displayed.
•The IN USE/CHARGE/HOLD indicator on the base
unit flashes.
•If you put a call on hold for more than 6 minutes, an alarm tone will sound. The
call will be disconnected after a total of 10 minutes.
To release the hold
Lift the handset, or press
•If another phone is connected on the same line (p. 53), you can also release the
hold by lifting its handset.
To adjust the receiver volume (HIGH, MEDIUM or LOW)
or speaker volume (6 levels) while talking
To increase, press
To decrease, press
•The display will return to the length of the call.
While using
•Each time you press Ö
level will change among 3 levels (HIGH,
MEDIUM or LOW). Your phone comes from
the factory set to level MEDIUM.
While using
•Each time you press Ö
level will change among 6 levels. Your phone
comes from the factory set to level 3.
•When you replace the battery, the selected receiver/speaker volume setting will
return to the factory set. Reprogram if necessary.
24
or
.
Ñ
.
Ö
or
Ñ, the volume
or
Ñ, the volume
.
HIGH
Low
MEDIUM
Low
LOW
Low
Ex. Speaker volume:
Low
Line on hold
00-00-08
Loud
High
Ñ
Ö
Loud
High
Ñ
Ö
Loud
High
level 6
Loud
High
Advertisement
Table of Contents
